How to Shock an Above Ground Pool?

  • SumoMe

Introduction

Shocking a swimming pool is among the most common things any home owner will to do as part of pool maintenance.

To shock an above ground swimming pool can be very simple if you know what you are doing. At the same time, you can spend a lot of money if you do not understand the procedure properly. There are lots of different swimming pool shock brands today in the market sold by almost any type of outdoor retailer. The process of pool shocking is an affordable way of eliminating green algae as well as other bacteria in your swimming pool.

Above the ground swimming pools are totally different from in-ground swimming pools in several ways. You can’t just use any type of shock on the above ground pool because this may cause damage.

Pool Shocking Options

For example, if you plan to use a powder shock in the above the ground pool & the shock is added to the swimming pool with mixing or first breaking it down, then if the shock happens to hit the vinyl linear, it may “burn” or even stain the pool liner.

In order to properly shock your above ground pool, you will have to first use a pool test chemical test kit or chemical test strip. This is the first step in determining the level of chlorine in your swimming pool. This process will help you figure out the amount of shock to add in the pool.

As soon as you have checked and determined the level of chlorine in your pool, you will need to read side of the package of liquid shock or powder shock carefully. Different swimming pool shock manufacturers have different chlorine strengths in their products. So always be sure to read carefully the sides of swimming pool shock package just before you add shock to the pool.

Now that you’ve already figured out the amount of swimming pool shock you will need to add to the pool, if you plan to use powdered swimming pool shock, you need to be very careful so as to avoid burning or staining the pool linear. Always make sure that you pre-mix powdered shock in a container or you may add the shock through skimmer while filter system is running. If you have got a multi-port valve on the filter system you are using, you will have to turn it so as to re-circulate position as you add the pool shock.

If you don’t have any shock, you can use some bleach. But note that bleach contains less chlorine so you may need so much of it.

If you have liquid shock but the label does not disclose the amount to use, add one gallon of swimming pool shock to ten thousand gallons of water.

Note that it’s recommended to brush your swimming pool slope, walls and the floor every time the pool is shocked.

Swimming pools shocks can be purchased at swimming pool supply stores and even home centres.

Conclusion

If you own an Above Ground Pool, then you ought to know what it can look like if you don’t take care of water that’s in it. Treating a swimming pool with chemicals is the best way to get rid of algae and bacteria. The process of shocking a swimming pool requires diligence to avoid cloudy pool water. However your job will be made easier if you read through this article before shocking your pool.